Abba, Habu Yusuf, Majid, Roshida Abdul, Ahmed, Muhammad Hamdan, & Gbenga, Olutobi. (2022). Validation of Design builder Simulation Accuracy Using Field Measured Data of Indoor Air Temperature in A Classroom Building. Management, 7(27), 171-178. DOI: 10.35631/JTHEM.727014
Amerine, M, Berg, H, & Cruess, William V. (2021). American Society of Refrigerating and Air Conditioning Engineers. ASHRAE handbook. Guide to Sources for Agricultural and Biological Research, 462.
Bryan, Edvard. (2014). Rough Guide to Sustainability.
Byrne, Aimee, Byrne, Gerard, Davies, Anna, & Robinson, Anthony James. (2013). Transient and quasi-steady thermal behaviour of a building envelope due to retrofitted cavity wall and ceiling insulation. Energy and Buildings, 61, 356-365. DOI: 10.1016/j.enbuild.2013.02.044
Danovska, Maja, Pernigotto, Giovanni, Baggio, Paolo, & Gasparella, Andrea. (2022). Simulation uncertainty in heat transfer across timber building components in the Italian climates: The role of thermal conductivity. Energy and Buildings, 268, 112190. DOI: 10.1016/j.enbuild.2022.112190
Hashmi Rafsanjani, Lilisadat, Heydari, Shahin. (2017). Evaluation Of Comparative Thermal Comfort In Residential Houses Of Hot And Dry Climate, Case Study: Kerman Province. Hot And Dry Climate Architecture, 7, 43-65. DOI: 10.29252/AHDC.2018.1422
Heydari, Shahin. (2014). Thermal Adaptation in Architecture: Tehran: University of Tehran Press. (In Persian).
Javed. Saqib, Lechner. Roman, Behrens. Jan. (2016). Testing and Validation of TEKNOsim: A Building Energy Simulation Program, In Proceedings of the Twelfth World Congress REHVA (Clima 2016).
Koch-Nielsen, Holger. (2013). Stay cool: a design guide for the built environment in hot climates: Routledge. (In Persian).
Landolfi, Roberto, & Nicolella, Maurizio. (2022). Durability assessment of ETICS: Comparative evaluation of different insulating materials. Sustainability, 14(2), 980. DOI: 10.3390/su14020980
Lu, Yihang, Hu, Jun, & Zhong, Ke. (2022). An approximate parametric model for quantifying the thermal mass with harmonic variation of outdoor air temperature. Journal of Building Engineering, 50, 104195. DOI: 10.1016/j.jobe.2022.104195
Mansoureh, Tahbaz. (2017). Climatic Knowledge Climatic Design: University Of Shahid Beheshti. (In Persian).
Mavromatidis, Lazaros Elias, Mankibi, Mohamed EL, Michel, Pierre, & Santamouris, Mat. (2012). Numerical estimation of time lags and decrement factors for wall complexes including Multilayer Thermal Insulation, in two different climatic zones. Applied Energy, 92, 480-491. DOI: 10.1016/j.apenergy.2011.10.007
Mohammad, Shaghaig. (2013). Study of thermal behavior of common wall materials. case study: Tehran residential buildings. Journal of Fine Arts-Architecture and Urban Development, 18(1), 69-78. (In Persian).
Moslehi, Hamed, Abdulhirizi, Rana, Zulfiqari. Alireza, Ebrahimghani. (2016). Design And Load Calculations Of Mechanical Installations Builder Design: Noavar. (In Persian).
Pekdogan, Tugce, & Basaran, Tahsin. (2017). Thermal performance of different exterior wall structures based on wall orientation. Applied Thermal Engineering, 112, 15-24. DOI: 10.1016/j.applthermaleng.2016.10.068
Qabadian, Vahid. (1994). Climatic analysis Of Iran's Traditional Buildings: Tehran University. (In Persian).
Regulations, Office Of National Building. (2020). Chapter 19 of National Building. (In Persian).
Reilly, Aidan, & Kinnane, Oliver. (2017). The impact of thermal mass on building energy consumption. Applied Energy, 198, 108-121. DOI: 10.1016/j.apenergy.2017.04.024
Rodrigues, Eugénio, Fereidani, Nazanin Azimi, Fernandes, Marco S, & Gaspar, Adélio R. (2023). Climate change and ideal thermal transmittance of residential buildings in Iran. Journal of Building Engineering, 74, 106919.DOI: 10.1016/j.jobe.2023.106919
Rodrigues, Eugenio, Fernandes, Marco S, Gaspar, Adelio Rodrigues, Gomes, Alvaro, & Costa, Jose J. (2019). Thermal transmittance effect on energy consumption of Mediterranean buildings with different thermal mass. Applied Energy, 252, 113437. DOI: 10.1016/j.apenergy.2019.113437
Sadati, Seyed Esmaeil, Rahbar, Nader, & Kargarsharifabad, Hadi. (2023). Energy assessment, economic analysis, and environmental study of an Iranian building: The effect of wall materials and climatic conditions. Sustainable Energy Technologies and Assessments, 56, 103093. DOI: 10.1016/j.seta.2023.103093
Sharifian-Qazijehani, Helen. (2016). Investigating The Effect Of Thermal Mass Of Common Materials In the Construction Of External Walls Of Buildings In Reducing The Energy Consumption Of Tabriz Buildings. International Conference On Architecture, Civil Engineering And Urban Development In The Third Millennium. (In Persian).
Simões, I, Simões, N, & Tadeu, A. (2012). Thermal delay simulation in multilayer systems using analytical solutions. Energy and buildings, 49, 631-639. DOI: 10.1016/j.enbuild.2012.03.005
Sokhdan Sorkhabi, Zahra, Khanmohammadi, Mohammad Ali. . (2016). Optimizing The Energy Performance Of Non-Opening Walls In Sunny Fronts. Hoviatshahr, 23 73-82. (In Persian).